Blogues
Il est important de contrôler trois points dans le processus de moulage par injection
Date de publication :
2025-03-29 11:24
Vues :
-
1: The quality of plastic parts needs to be controlled
mainly into scale, as well as appearance quality control. The scale of the workpiece cannot exceed the specified tolerance, if it is said that once it is exceeded, we need to implement reasonable modifications for the part that exceeds the tolerance in time. The quality of the appearance is to go through the process technology to prevent the obvious shortcomings such as burrs and cracking and peeling, when the process technology is difficult to solve, the mold can be repaired to improve the surface quality of the workpiece, and the surface of the mold can also be treated to further improve the hardness.
Second: the control
of the production power of the forming and quality of the workpiece is largely affected by the speed of the press, the formability of the workpiece will be better when the press is selected at low speed in the drawing process, and the speed of the press will be adjusted higher if you want to improve the output power, but the speed progress will increase the probability of cracking of the workpiece, so the staff should control the speed of the press well. Three: the control
of the cost to ensure the quality and appearance of the workpiece, to avoid too many defective products, so there is repeated processing, the reasonable use of technical technology, can avoid the appearance of too many parts. In the cost saving, we must pay attention to ensure that the scale, accuracy and quality of the parts are in line with the standard.
Autres actualités
Self-priming pump or booster pump for solar water supply?
Les pompes auto-amorçantes pompent généralement l'eau directement des réservoirs ou des puits vers les pipelines, puis la transportent. La pompe de surpression est utilisée lorsque la pression de l'eau est trop faible et que le débit d'eau est très faible lors de l'alimentation ou de la décharge de l'eau.
Qu'est-ce qu'une pompe à eau solaire et comment fonctionne-t-elle
Les pompes à eau solaires constituent une solution économique pour acheminer l'eau vers des endroits difficiles d'accès ou aux budgets limités. Les pompes à eau solaires sont utilisées dans les applications résidentielles et commerciales. Elles constituent une alternative propre aux moulins à vent et aux générateurs fonctionnant aux combustibles fossiles.
Quelle est la durée de vie de l'énergie solaire ?
La durée de vie de l'énergie solaire est d'environ 10 ans. 1. La durée de vie du chauffe-eau étant de dix ans, si elle dépasse dix ans, la sécurité sera réduite et il y a un risque élevé d'électrocution.
Features of solar photovoltaic water pump system
1. The photovoltaic power generation system is fully automatic and does not require manual duty; the photovoltaic pumping system is composed of solar cell arrays, pumping inverters and water pumps, eliminating the need for energy storage devices such as batteries, replacing electricity storage with water storage, and directly driving the pump to pump water. , high reliability, while greatly reducing the construction and maintenance costs of the system.
Consultation produit :
E-mail de contact :
Adresse :
Village de Lianshu, ville de Zeguo, ville de Wenling, Taizhou, province du Zhejiang, Chine